Product specifications

AD-4402 Page 31
6.2.2.
6.2.2.6.2.2.
6.2.2. Using a Recipe Code
Using a Recipe CodeUsing a Recipe Code
Using a Recipe Code
Set the menu [Function] - [Function setting] - [Sequence] - [Basic] - [Recipe mode] to
sequential mode ( [5q f- 8] to [1] or [2] ), when the recipe code is used.
[5q f- 8] [1] Semi-automatic mixing sequence
[5q f- 8] [2] Automatic mixing sequence
6.2.3.
6.2.3.6.2.3.
6.2.3. Construction of a Recipe Code
Construction of a Recipe CodeConstruction of a Recipe Code
Construction of a Recipe Code
The AD-4402 indicator can store one hundred recipe codes.
A recipe code can store a maximum of ten material codes in the order of
accumulating them.
These parameters are stored in backup memory even without power.
Refer to the backup method [0tHf-11] of the function list.
Caution
If the flash memory is selected for memory backup [0tHf
0tHf0tHf
0tHf-
--
-11
1111
11], the current
built-in automatic program mode is stopped.
Name
Display Symbol & Example Memory
Recipe code
rCode
Recipe name
Blend coffee
Material codes of maximum ten codes.
It is stored in order to accumlate them.
Code 1
Backed up RAM
( factory setting)
or
flash memory
Total Weight for a recipe code
RTot
10.00
Total Counts for a recipe code
RTot#
1000
Backed up RAM
6.2.4.
6.2.4.6.2.4.
6.2.4. Recalling
RecallingRecalling
Recalling a Recipe Code
a Recipe Codea Recipe Code
a Recipe Code
The following steps are the explanation of how to recall the recipe code stored in the
indicator. Suppose that the recipe code is used (The menu [Function] - [Function setting]
- [Sequence] - [Basic] - [Recipe mode] is set to [5q f- 8] [1] or [2]). .
Caution
The code can be recalled during the last weighing. But the code is in effect
only after the batch finish (after finishing the last weighing).
Step 1 Press the CODE RECALL key.
Then the recipe code blinks.
Step 2 Enter the material code using the numerical keys
The details of the recipe code are displayed in the sub-display.
Step 3 Press the ENTER key to decide the code.