Product specifications

AD-4402 Page 29
Tare of a Material Code
Use to copy a current tare to the preset tare.
Set the preset tare function [genf-12 ] of the function list.
[genf-12] [0] If the preset tare of the code is zero, the last tare value is in effect.
(factory settings)
[genf-12] [1] If the preset tare of the code is zero, the tare value is reset.
Step 1 Press and hold the ENTER key and press the key.
Then menu MatEdit blinks.
Step 2 Press the key to select the menu Tare. And press the ENTER key.
Step 4 Specify a code number using the numerical keys and press the ENTER key.
Then the current tare value is copied to preset tare.
Step 5 Press the ESC key several times to return to the weighing mode.