Product specifications

AD-4402 Page 15
3.4.
3.4.3.4.
3.4. Installing Options
Installing OptionsInstalling Options
Installing Options
Caution
Remove the power cord before the operation to install an option.
Do not install the same options.
Do not touch the internal parts within ten seconds after removing the power
cord because you may receive an electric shock.
Do not forget to tighten the screws. If a screw is not tightened, it may cause a
short circuit or an error due to noise.
Three option boards can be installed in the slots.
Initialize the RAM data in accordance with section 9.4. Initializing Parameters.