Product specifications

Page 104 AD-4402
9.5.
9.5.9.5.
9.5. Remote Operation
Remote OperationRemote Operation
Remote Operation
This mode can read and write the parameters of the function list, data of the material
code and recipe code and calibration data.
The built-in RS-485, RS-422/485 (OP-03) or RS-232C (OP-04) is used for remote
operation.
It is necessary to install the remote setup program in the computer or controller
before use. Refer to http://www.aandd.co.jp
Refer to the instruction manual for details of the program.
Caution
Do not down load data during a weighing operation.
Remove all connections to prevent an irregular operation.
Maintain the power supply during the remote operation.
Entering the Remote Operation Mode
Step 1 Press and hold the ENTER key and press the key.
Step 2 Press the key to select menu remote operation. And press the ENTER
key.
Advise
The following RS-232C to RS-485 converter can be used.
AD-7491, or other converters on the market.