Quick start manual

Page 2
Installation
Wall Mounting
Using the four mounting clips shipped with the unit, follow
the instructions below:
1. Attach lower mounting clips to wall using 6mm or 1/4" bolts
2. Predrill top holes, but do not attach mounting clips
3. Angle top out and insert lower mounting clips into front track
4. Insert two top mounting clips into front track
5. Rotate top toward wall, until top mounting clips touch the wall
6. Fix top mounting clips in place using 6mm or 1/4" bolts
(
M
i
n
i
m
u
m
2
5
0
m
m
)
1
6
7
m
m
4
4
2 6
5
3
3
3
1
Setup keys behind plate.
Reverse plate for Kg/t.
Mounting
Clip
Case
Front Slot
Affix Decimal
Point as Required
Fitting a Fixed Decimal Point