Specifications

74
21. Options And Peripheral Equipments
Note
The FXi-02, FXi-08 and FXi-09 can not be used at the same time.
FXi-02 USB interface
(Installed in the balance, Applicable OS: Windows 98 OSR2 or later)
Used to transmit the balance weight data (numerical value
only) uni-directionally to a personal computer via USB.
Can transmit the balance weight data (numerical value only)
directly to application software such as Microsoft Excel, Word
and memo pad.
Driver installation is not necessary.
Note
To perform bi-directional communication using WinCT
or input statistical data or GLP data to a personal
computer, use the USB converter (AX-USB-9P-EX)
FXi-08 Ethernet Interface
Used to connect the balance to a LAN.
The "WinCT-Plus" data communication software is provided as a
standard accessory and can perform the following.
Acquire data from multiple balances connected to a LAN.
Control these balances with commands.
Acquire data transmitted from balances.
Example: When pressing the
PRINT key of the balance, data
is output and is acquired by the computer.
The stored data can be used with Microsoft Excel (if installed).
FXi-09 Built-In Battery Unit (Ni-MH Rechargeable Battery Pack)
Charging time: Approximately 10 hours.
Continuous operation hours: Approximately 8 hours
Note
The charging time depends on the operating environment.
During charging, the balance is not available for use.
AX-FXi-31 Main Unit Cover
Main unit protective cover provided as a standard accessory.
AX-USB-9P USB Converter
Adds a COM port to a PC.
Enables bi-directional communication between the PC
and the balance when a USB driver is installed.
Can use serial communication software such as WinCT
on a PC without COM ports.
HR
A
–
0
2
Exam
p
le of us
e
F
X
i
-08 Exam
p
le of us
e