Specifications

14
6. Weighing
6-1. Basic Operation (Gram Mode)
1 Place a container on the weighing pan, if necessary.
Press the RE-ZERO key to cancel the weight (tare). The balance
displays
0.0000 g. (The decimal point position depends on the balance
model.)
2 Place a sample on the pan or in the container.
3 Wait for the stabilization indicator to turn on. Read the value.
While the stabilization indicator is on, pressing the PRINT key will
output the weight value, using the RS-232C serial interface.
4 Remove the sample and container from the pan.
Note
Peripheral equipment, that is sold separately , such as a printer or
a personal computer is required.
To use other units, press the MODE key and select an
appropriate unit.
Press the SAMPLE key to turn on or off the minimum weighing
value.
When the ON:OFF key is pressed with a container placed
on the weighing pan, the balance displays 0.0000 g and
weighing is started,
Weighing pa
n
Containe
r
Sampl
e
Remove the sample
Display off
Weighing pa
n
Containe
r