Technical data
- 4 - KCR 342
2.2 meaning of the symbols used
Important note
—> General note
–
/
–
/
Optionaluseofthebuttons
• Performingworks
2.3 teChniCal data
The requirements of the following are met:
2006/95/EC, 2004/108/EC
The product fulfils the guidelines and standards for CE labelling.
Unless otherwise noted all values are specified as "typical".
HF input:
Frequency range: ...................................................... 177.5 … 858 MHz
Level: ..................................................................... 60 dBμV … 80 dBμV
Input impedance: ............................................................................75 Ω
Return loss: .....................................................................................8 dB
Channel input: ...................................................................C 05 … C 69
Output specifications:
Audio
Frequency range: ..........................................................20 Hz … 15 kHz
Level at -12 dB: .......................................................................500 mV
rms
Impedance: .................................................................................... 1 kΩ
Noisevoltageratiorated(DIN45633): ...........................................60 dB
Non-lineardistortionfactor: ............................................................0.6 %
Video
Signal-to-noise ratio:..........................................................≥ 54 dB (rated)
Level (75 Ω): ..................................................................................1 V
pp
Impedance: ....................................................................................75 Ω
Connections:
HF inputs: ..........................................................................2 IEC sockets
Loop through outputs: ...........................................................2 IEC sockets
Connection strip (20-pin): ...................
For supply voltages and control circuits
AV output: ...........................................................................
26-pin
socket