Technical data

- 22 - KCR 342
blaCk bar
This menu allows to mask a part of the screen ( e.g. "ticker") by a black bar.
The vertical position and the height can be adjusted.
 • U sing the buttons select the submenu "SUBTITLE - black".
Bx 1A
black
SUBTITLE
40/10
 • U sing the buttons select the setting of "vertical position / height of the
bar" and set the value you want using the buttons .
• Press the button to activate these settings and to leave the "Setting the
subtitle functions" menu .
—> The "Storing data" – "MEMORY" menu is activated (see page 22).
storing data
CANCEL
Bx 1A
S => STORE
MEMORY
S
M
 • Allprogrammeddataissavedbypressingthe button. Then you will be
returned to the menu item "Selecting the module / channel strip" (page 13).
—> By pressing the button, you will be returned to the menu item
"Selecting the module / channel strip" (page 13) without saving the
programmed data.
—> Select additional channel strips for programming if necessary.