Technical data

- 19 - KCR 342
identifiCation of the stereo / dual tone
In this menu, you can select whether the stereo audio identification is decoded
from the VPS data or from the MPEG data stream. Further you can switch be-
tween the languages on TV stations with dual tone.
Bx 1A
mpeg
AUDIO
DUAL norm
 • Using the buttons, select which data stream should be decoded
"mpeg" or "VPS."
 • Use the buttons to position the cursor under the dual tone code to
be set. Use the buttons to switch between ("DUAL norm" or "DUAL
swap") audio streams (languages) for dual tone TV channels.
 • Pressthe button.
—> The "Picture format / Teletext mode" – "VIDEO WSS" menu is acti-
vated.
piCture format / teletext mode
If problems with the automatic picture format switchover (e.g. 4:3, 16:9, Letter-
box) arise with the connected devices, you can switch "off" the Wide-Screen-
Signaling (WSS) in this menu.
In addition you can activate or deactivate the teletext mode.
Bx 1A
WSS on
VIDEO
TXT on
 • To activate/deactivate WSS, use the buttons to select "on" or "off".
 • Toactivate/deactivateteletextmode, use the buttons to position the
cursor under teletext mode " TXT on " and use the buttons to select
"off" or "on".
 • Pressthe button.
—> The "Activating test lines" – "TESTLINES" menu is activated.