Technical data
- 17 - KCR 342
station filter
In this menu, select the channel from the data stream that is to be made avail-
able through this channel strip.
If the message "no transponder" appears, no input signal is present. In this
case, you should check the previous settings as well as the configuration of the
receiving system.
—> At first, programme the channel strips "A" and "D", so that trans-
ponders are set for the channel strips "B" and "C".
If the "scanning ..." message appears on the display, the table of received
channels is being read. Please wait until this process is finished.
Bx 1A
Das Erste
04/04 + TV
Meaning of the indicators shown in this example:
"04/04" The 4th of a total of 4 TV channels is being shown or
has been activated.
"+" The audio stream for the current TV channel is avail-
able in several languages.
"TV" The data on the display corresponds to a TV channel.
"Das Erste" Station name
Other possible indicators:
"RA" The data on the display corresponds to a radio sta-
tion.
" * " A star indicates that this TV or radio station is scram-
bled.
—> For radio stations, the back
ground of the screen of the connected TV
or test receiver is darkened.
—> If a service number (e.g. "SERVICE 131") appears instead of "TV" or
"RA", this indicates that an unnamed station or an undefined data
stream is being received.
• SelectthedesiredTVorradiostationwiththe buttons.
• Pressthe button.