Technical data
- 14 - KCR 342
tuner (only Channel strip C)
In this menu, select the tuner ("TUNER Line A" or "TUNER Line D") for channel
strip "C" of which demodulated data stream you would like to use a station
from.
—> At first, programme the channel strips "A" and "D", so that trans-
ponders are set for the channel strip "C".
Bx 1C
TUNER Line A
INPUT
• Usingthe buttons, select
"TUNER Line A" or "TUNER Line D"
.
• Pressthe button.
—> The "Station filter" – e.g. "Bx 1C 02/04 + TV" menu is activated
(page 17).
input Channel / fine tuning (only Channel strips a and d)
In this menu set (only for channel strips A and D) the input channel – and if
necessary – via a submenu the fine tuning.
Bx 1A
C60 (786.0)
Input
OK
• Settheinputchannelforthedesiredtransponderbypressingthe but-
tons repeatedly or permanently.
—> Beside the input channel set the corresponding frequency is dis-
played.
—>
If "– –" appears in the second line of the display, there is no input
signal present. Check the configuration of the antenna system and
head-end station.
—> If the received signal is all right, "
OK
" is displayed.