Technical data

- 13 - KCR 342
—> The display shows "SETUP OEM" and the software version of the
basis unit (e.g. V 8).
—> The output level of the output collector can be adjusted in the "SET-
UP" menu (see KAB 3000 assembly instructions).
seleCting the module / Channel strip
Bx 1A
C5-12,S3-24
TWIN-SAT
C07
Böx 4
C5-12,S3-24
TWIN-SAT
C07
Bx 1B
Arte
QUAD
V 12
Bx 1A
Das Erste
QUAD
V 12
—> The display shows, for example, the "Bx 1A QUAD" menu.
"Bx" indicates the slot
"1" indicates slot no. 1
"A" indicates channel strip A
"Das Erste" name of the selected channel
"V 12" software version of the module
 • Press repeatedly if necessary to select the particular module (Bx ...)
or channel strip "A", "B", "C" or "D" to be programmed.
—> At first, programme the channel strips "A" and "D", so that trans-
ponders are set for the channel strips "B" and "C".
 • Pressthe button to activate the channel strip.
Channel strip C:
—> The "Tuner" – "INPUT" menu is activated.
Channel strips A and D:
—> The "Input channel / Fine tuning" – "INPUT" menu is activated
(page 14).
Channel strip B:
—> Programme channel strip "A" prior to channel strip "B".
—> The "Station filter" menu is activated (page 17).