Technical data

- 10 - KCR 342
5 programming
5.1 prepar ation
 • Connectthedigitalmoduletoaprogrammedmodulatormodule.
 • ConnectthetestreceivertotheHFoutputonthemodulatormodule.
 • Adjustthetestreceivertotheoutputchannelofthechannelstriptobeset:
Digital module – channel strip "A" —> modulator module – channel strip "A",
Digital module – channel strip "B" —> modulator module – channel strip "B",
Digital module – channel strip "C" —> modulator module – channel strip "C",
Digital module – channel strip "D" —> modulator module – channel strip "D".
—> Entries in the settings menus can be stored by pressing the but-
ton. You will be returned to the menu item "Selecting the module /
channel strip".
 • Switchonthemodulatorifnecessary.Foreachmodulator,thereisagreen
LED which indicates if the modulator is switched on.
LED – Channel strip “A“
LED – Channel strip “B“
LED – Channel strip “C“
LED – Channel strip “D“