Product specifications

6-4. Switching Output Voltage

The output voltage can be switched using the slide

switch on the GX-06K panel. "0V~" has been set at

factory before shipment.

"0V~" (0V to1 V):

At zero 0.000 V At full scale 1.000 V

"0.2V~" (0.2 V to1 V):

At zero 0.200 V At full scale 1.000 V

6-5. Output Voltage Fine Adjustment

The output voltage has been adjusted at the factory

before shipment.

Using the ZERO and SPAN fine-adjustment control

and a voltmeter, the output voltage can be fine

adjusted.

Fine-adjustment procedure

1. Turn the display off, using the ON:OFF key. At this

time, the output voltage will be at zero. Turn the

ZERO control so that the voltmeter indicates 0.000 V

when the slide switch is set to "0V~"; 0.200 V when

the slide switch is set to "0.2V~".

2. While pressing and holding the SAMPLE and

PRINT keys, press the ON:OFF key. The balance

displays p5 . At this time, a voltage of 1 V is

generated. Turn the SPAN control so that the

voltmeter indicates 1.000 V.

3. Repeat steps 1 and 2 until the correct output voltage

is obtained.

Slide switch

"0V~" "0.2V~"

GX-06K

2 pin, -

7 pin, +

SPAN control

ZERO control

Display for setting the output

to 0 V (0.2 V)

Display for setting the outpu

to 1 V