Product specifications

6. Analog Output (GX-06K)

6-1. Installing The GX-06K

Install the GX-06K option in the following procedures:

1. Remove two screws.

Remove the standard RS-232C board.

2. Unlock and remove two connectors from the

standard RS-232C board.

Do not pull the cable.

3. Connect two connectors to the GX-06K board.

4. Put the rubber packing between GX-06K board

and the balance.

Insert the GX-06K board into the balance.

Fasten the GX-06K board with two screws.

Note

Confirm right surface and direction of the option board, when the option is inserted.

The position of the switch (S1) is free.

The balance side of the rubber packing is the surface that there are gaps and ridges.

Step 2

Step 1

RS-232C Board

Cable

Rubber packing

Screw

Connector with lock

-06K board

Step 3

Step 4

Rubber packing

Connector

Cable

Screw

Switch (S1)