Product specifications

12
Class Item and Parameter Description
Cp Hi
Upper limit
Cp lo
Lower limit
Refer to "4-4. Setting The
Upper And Lower Limit
Values "
Displayed when Cp in 0
is selected.
Cp ref
Reference value
Cp lmt
Tolerance
Refer to "4-4. Setting The
Upper And Lower Limit
Values "
Displayed when Cp in 1
is selected.
: Factory settings.
4-4. Setting The Upper And Lower Limit Values
The results of the comparison are indicated by HI, OK or LO on the display.
Operating conditions: No comparison
Comparison when the weighing data is stable or overloaded,
excluding “near zero”
Comparison when the weighing data is stable or overloaded,
including “near zero”
Continuous comparison, excluding “near zero”
Continuous comparison, including “near zero”
To compare, use: Upper limit value and lower limit value
Reference value and tolerance value
Input method: Digital input
Weighing input
"near zero" means that weighing value is within ±10 digits from zero point.
Example: In case of GX-20K, the range of ±1.0g is "near zero".
4-4-1. Example 1
Comparison when the weighing data is stable or overloaded, excluding "near zero", upper
limit and lower limit.
Selecting a comparator mode
Step 1 Press and hold the SAMPLE key until ba5fnc of the function table is displayed,
then release the key.
Step 2 Press the SAMPLE key several times to display Cp fnc .
Step 3 Press the PRINT key.
Step 4 Press the RE-ZERO key several times to display Cp 1 .
Step 5 Press the SAMPLE key to display Cp in .
Step 6 Press the RE-ZERO key several times to display Cp in 0 .
Step 7 Press the
PRINT key to store the selected mode.