Product specifications

4. Comparator Output (GX-04K)

Comparator output, is the function to output the comparison results between the weighing

data and upper/lower limit values. Whether or not to sound the buzzer when the output is

conducting can be set.

4-1. Installing The GX-04K

Install the GX-04K option in the following procedures:

1. Remove two screws.

Remove the standard RS-232C board.

2. Unlock and remove two connectors from the

standard RS-232C board.

Do not pull the cable.

3. Connect two connectors to the GX-04K board.

4. Put the rubber packing between GX-04K board

and the balance.

Insert the GX-04K board into the balance.

Fasten the GX-04K board with two screws.

Note

Confirm right surface and direction of the option board, when the option is inserted.

The position of the switch (S1) is free.

The balance side of the rubber packing is the surface that there are gaps and ridges.

Step 2

tep 1

RS-232C Board

Cable

Rubber packing

Screw

Connector with lock

Step 3

Step 4

-04K board

Rubber packing

Connector

Cable

Screw

Switch (S1)