Instruction manual

68
FXi-11 Large breeze break
 Breeze break with greater height. Can be used for all models. Convenient when a large beaker
or measuring cylinder is used and requires more height.
FXi-12 Animal weighing pan
 Applicable models: FZ-1200i /2000i /3000i /5000i and FX-1200i /2000i /3000i /5000i
 Used for weighing small animals.
 Placing the animal weighing pan on the balance will reduce the weighing
capacity by approximately 200 g.
FXi-15-EX Carrying case
 You can carry the FZ-i / FX-i series balance by placing it
in the carrying case.
AX-FXi-31 Main unit cover
 Main unit protective cover provided as a standard
accessory.
AD-1683 DC static eliminator
 Used to minimize weighing errors due to static electricity on the material.
The AD-1683 is direct-current static eliminator. The ions generated
produce no breeze and are effective over a long distance. Therefore,
the balance can accurately weight powders, etc. by using the AD-1683.
AD-1684 Electrostatic field meter
 This option measures the amount of the static charge on the sample,
tare or peripheral equipment and displays the result.
If those are found to be charged, discharge them using the AD-1683
DC static eliminator.
AD-1689 Tweezers for calibration weight
 This option is used when calibrating the balance using an external weight.
AX-USB-9P-EX USB converter
 Adds a COM port to a PC.
 Enables bi-directional communication between the PC and the balance when a USB driver is
installed.
 Can use serial communication software such as WinCT on a PC without COM ports.