Instruction manual

51
11-2 GLP Report
Set the following parameters to output the report.
 To print the report, set the “GLP output ( info )” parameter to “1”, set the “Data output pause
( pU5e )” parameter to “1” and use MODE 3 of the AD-8121B. For details on using the printer,
refer to “15-1 Connection to the AD-8121B Printer”.
 To output the report to a personal computer using the RS-232C serial interface, set the “GLP
output ( info )” parameter to “2”.
Note
If the time and date are not correct, adjust the AD-8121B clock and calendar (FX-i series) or
use “Cl adj “ of the function table to adjust the time and date (FZ-i series).
Calibration report using an internal weight
When the setting is “info 1”: When the setting is “info 2”:
A & D<TERM>
MODEL FZ-3000i<TERM>
S/N 01234567<TERM>
ID ABCDEFG<TERM>
DATE<TERM>
2008/12/31<TERM>
TIME<TERM>
12:34:56<TERM>
CALIBRATED(INT.)<TERM>
SIGNATURE<TERM>
<TERM>
<TERM>
---------------- <TERM>
<TERM>
<TERM>
CALIBRATED(INT.)
SIGNATURE
- - - - - -
A&D
MODEL
S/N
ID
DATE
TIME
FZ-3000i
01234567
ABCDEFG
2008/12/31
12:34:56
Manufacturer
Model
Serial number
ID number
Date
Time
Calibration type
Signature
AD-8121 format General data format