Instruction manual

48
Confirming the time
6 The current time is displayed with all the digits
blinking.
 When the time is correct and the date does not
need to be confirmed, press the CAL key and go to
step 8.
 When the time is correct and the date is to be
confirmed, press the SAMPLE key and go back to
step 4.
 When the time is not correct and is to be changed,
press the RE-ZERO key and go to step 7.
Setting the time (with part of the digits blinking)
7 Set the time in a 24-hour format using the following
keys.
SAMPLE key To select the digits to change
the value. The selected digits
blink.
RE-ZERO key To increase the value by one.
MODE key To decrease the value by one.
PRINT key To store the new setting,
display end and go to step
8.
CAL key To cancel the new setting and
go back to step 4.
Quitting the operation
8 The balance displays the next menu of the function
table. Press the CAL key to exit the clock and
calendar function and return to the weighing mode.
Notes
Do not enter invalid values such as a non-existing date when setting the time and date.
To the date
setting mode
Confirm