Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
P3 Help
86
Statistics
Viewer Page
and Reader Devices) while the Statistics Viewer is open.
Clear
Additional
Positional
Clears any codes currently in the Additional Positional
comment field of the current detail record or repeating
comment window.
Clear
Conditional
Comment
Clears and flag codes currently in the Conditional
Comment field of the current detail record or repeating
comment window.
Clear Textual
Comment
Clears any text currently in the Textual Comment field of
the current detail record or repeating comment window.
Toggle Length
Extension
If a Nose Stop Extension is defined, this command will
toggle the extension on or off. When the extension is
enabled, a "+" sign will appear above the Length
field.
Note: If the Nose Stop Extension setting is zero, this
command has no effect. By default, a non-zero nose stop
extension is enabled whenever a tag session is opened or
the active profile is changed.
Comment Map Commands
This type of map command will automatically insert any values entered into this
page into the current detail record. If a field is blank, nothing will be inserted into the
corresponding field of the current detail record.
Any comments in Species, Run, Rear or VRT fields of this command will overwrite
any existing values in the current detail record. The Additional Positional
Comment field inputs a comment into the current detail record with an offset
defined in the Start field. In the example shown, the word 'TEST' will be inserted
into the current detail record five positions from the beginning. Conditional
comments in this command will be appended to current detail record; any duplicate