Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
Tools
83
digitizer map.
Columns Number of vertical columns in the
digitizer map.
Height The printed height of the map (in
inches).
Width The printed width of the map (in
inches)
Default
Format
Default cell attributes such as font
style, background color, etc.
Zoom
Changes the magnification of the display from 'Fit to
Window' to 25%-150% of the defined print size. Zoom
settings are reset whenever the map is printed.
Add/Remove
Columns/Rows
The digitizer map editor allows rows and columns to be
added or removed from point of selection. Removing
rows and columns will remove any associated map
commands, so take care in performing these functions
on existing maps.
Cell
Formatting
Commands
These commands will change the font and color of one or
more selected digitizer cells. To select more than one
digitizer cell, hold the SHIFT key while clicking with the
mouse. The default format for map cells is set in the
Properties settings.
Assigning Map Cells
To assign a command to a map cell, simply double-click the cell and select a map
command. To remove an assigned map command from a cell, select the cell and
press the DELETE key.
Arranging Map Cells
Two contiguous map cells containing the same map command will be merged into
one cell. This feature is limited to merging multiple cells in a single row or a single
column.
An assigned map cell can be easily copied to another map cell by dragging the
selected cell's border with the mouse and dropping it on another cell.