Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
P3 Help
82
When a digitizer map is created, by default it will have 4 rows and 6 columns. To
change the default settings of a digitizer map, select the Properties command
located under the Edit menu on the digitizer map editor.
The digitizer map editor has these commands:
Command Description
New
Creates a new digitizer map.
Open
Opens an existing digitizer map.
Save
Saves any changes to the current digitizer map.
Note: any changes to an existing digitizer map will take
effect the next time a tag session is opened.
Save As Saves the current digitizer map as a new map.
Insert Map
Command
Inserts a map command into the selected cell. This
command can also be invoked automatically by double-
clicking the selected cell.
Page Setup These settings affect how the map will be printed, and
include parameters such as margin size, orientation
(landscape or portrait), and paper source.
Print
Prints the digitizer map to the selected printer.
Print
Preview
Previews the digitizer map in a window as it would be
printed on a page.
Properties
Opens the property settings window:
Digitizer maps have the following properties:
Property Effect
Name The name of the digitizer map
displayed throughout the application.
Rows Number of horizontal rows in the