Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
P3 Help
76
Property Effect
Name Identifies the tag action throughout the application.
Type There are three tag action types:
Filter If a tag code is entered from a reader
device and it is a member of the list of
tags in the action, it will be ignored.
Tip: An action of this type is useful for
testing the readability of a tag reader
with a test tag without affecting the data
of an open tag session.
Exclusive If a tag code is not a member of the list
of tags, then the message alert will fire
and any comments defined in the action
will be inserted into the current detail
record.
Tip: This is similar to the clip-file
verification function in PITTag2.
Inclusive
If a tag code is a member of the list of
tags, then the message alert will fire and
any comments defined in the action will
be inserted into the current detail record.
Tip: An action of this type is useful for
notifying the user when a target fish is
recaptured.
Source Select which kind of list will be used for a source of tag codes.
If List of Tag Codes is selected, the 'Tag Codes' tab page will
display as shown below. If Tag Session option is selected,
the 'Tag Sessions' tab page is displayed instead allowing the