Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
P3 Help
74
You can import configuration data that was previously exported
by a P3 application.
This is a useful feature for transferring configuration information between multiple
installations of the application.
Steps for Importing Configuration Data
1. Select the Import->Configuration command located under the File menu
command.
2. Select a file to import. Only configuration files previously exported from P3
can be imported.
3. P3 will analyze the file to determine the contents. Press the OK button and
the configuration data will be imported into P3.
Note: P3 will automatically append a version identifier to the name of all imported
objects to distinguish them from existing configuration objects.
Notes on Importing/Exporting Profiles: Any activated Tag Actions or associated
digitizer maps will be included with the other profile configuration data in the export
file. Wave files associated with sound events are not included in the export file.
Therefore, it's a good idea to verify the configuration of sound events after
importing a profile.