Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
Data Collection and Validation
55
File Name column in the example above. Grouping columns is useful for viewing all
tag sessions submitted on a certain date or for viewing all upload attempts for a
particular tag session.
The history report contains the following columns:
Column Description
Session
Name
Name of the Tag Session that was uploaded.
File Name Name of the Tag File associated with the Tag Session.
Upload
Date
Date and time the upload attempt occurred.
Upload
Complete
When data is submitted to PTAGIS, it is usually
queued for processing at a later time. A check mark
in this column indicates that PTAGIS has completed
processing the associated data.
Status Indicates whether the particular tag session data was
successfully loaded into PTAGIS.
Correction Indicates if the tag session was submitted as a
correction.
Message Displays the first line of feedback from PTAGIS about
the submitted data. The entire message can be
displayed in the Upload Detail window, accessed by
double-clicking a row.
The history report has the following commands located on the tool bar:
Command Description
Refresh
This command will query the PTAGIS server and
attempt to refresh the status information for all tag
sessions that do not have a check mark in the Upload
Complete column.
Detail
Displays the Upload Detail window, which contains
detailed status information for the selected tag
session. This can also be displayed by double-clicking
the row.
Purge
This command will delete status information from a
certain date or for a particular Status flag or if the
Upload Complete field is checked.
Note: If a tag session is deleted from P3, any
associated upload status information will also be
removed.
Print
Prints the status report.
Save
Saves the status report to a file.