Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
Data Collection and Validation
51
Statistics Viewer
The Statistics Viewer presents an up-to-date summary of Species Counts,
Duplicate Tag Codes, and Reader Device Statistics for an open tag session. The
viewer is automatically refreshed whenever data is changed in the open tag session
or new information is recorded from a reader device. This feature can be accessed
from under the Session menu or from a digitizer map command
(there is also a
digitizer map command to switch between sections of the viewer). The Statistics
Viewer has three sections, described in detail below.
Species Counts
Each row in the Species Count table presents subtotals for each unique species, run
and rear type combination included in the current Tag Session. Tag Detail Records
are tallied into subtotal columns ("Mortalities", "Recaptures", "Dot Outs", "New
Tags") based upon three attributes: records containing a Mortality Flag comment,
records containing a Recapture Flag, and/or records with a Dot-Out value in the Tag
Code field.
If a Tag Detail Record contains two or more of these attributes, it will be counted in
the left-most attribute's subtotal only. For example, a Tag Detail Record has a
Mortality Flag and a Dot-Out value for a Tag Code–only the Mortality subtotal will be
incremented. If a Tag Detail Record contains none of these attributes, it will be
counted in the "New Tags" subtotal column. The table also includes totals for each
row and column in the table.
Note: the columns for this table are fixed, however the individual flag codes that
determine if a record should be counted as a mortality or a recapture subtotal can be
modified by double-clicking on a cell under the respective column heading.
Tip: use the Search feature if you need custom subtotals based upon other data
fields or comment flags. A search can be saved and recalled at any time to provide
similar functionality as the Statistics Viewer.