Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
Data Collection and Validation
49
To assign a release date and time to a variable, double-click or press ENTER
in the corresponding Date/Time cell and either type in the value or press
[CTRL-;] (semicolon) to enter the system date and time, or press F4 to
display a calendar. Press the OK button to save the assignments.
All VRT codes must have a release date and time defined before a tag
session is considered valid. All release times must be in Pacific Standard
Time.
For more information about VRT Export and Import functions, see Importing
and Exporting VRT Tables.
Note
This command has a dual purpose: if the Tag Session header page is
displayed, then this command will allow the user to create a header note
; if
the tag detail page is displayed, then this command will allow the user to
create a detail note - an ad-hoc annotation to record additional information
about the current detail record.
Time
Check
This command stores the system date and time with the current detail
record.
Statistics
Viewer
This command displays a window containing statistical information about
detail records and any connected reader devices in the current tag session.
See the Statistic Viewer
topic for more information.
Tag
Detail
Viewer
This command displays a window containing a table of all detail records in
the current tag session.