Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
P3 Help
44
Record-Level Validation
Mandatory
Fields
To complete a detail record, the Tag Code and Species,
Run and Rearing-Type fields are mandatory and must
have a valid value entered.
Note: The active profile provides settings to optionally make
the Length and Weight fields mandatory also.
Constraint
Validation
When the user presses the Accept
button to save a complete
detail record, the data entered is validated against any
activated constraints
. If the data does not comply within the
constraints, the user is warned and given a choice to either
fix the record or continue processing.
Maximum
Detail
Records
A tag session can contain a maximum of 9,999 detail
records. The user is warned when the last detail record is
entered and prevented from entering any additional records.
Session-Level Validation
Duplicate
Tag Codes
When a new tag code is entered, the value is compared
against all other tag codes within the current tag session,
and if one or more tag codes are duplicated, the user is
prompted to take one of four possible actions (unless a
default duplicate action
has been configured in the active
profile).
Reject Clears the contents of the current Tag