Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
Data Collection and Validation
41
Species Run and
Rear
[Valid Species Run and
Rearing-Type code(s)]
Mandatory
This field (or fields) will be displayed one of two ways based upon the verbose
profile setting:
Character Codes
In this format, the user must select individual codes for each field, using the
mouse, keyboard or a digitizer command. Refer to the current PIT Tag
Specification Document for more information about these validation codes.
Verbose
In this format, the user can select one verbose species run and rearing-type
string from the field's drop-down list. The verbose string is translated into
the appropriate codes when the tag session is exported
to a Tag File for
submission to PTAGIS.
Length
nnnnn Optional
This field holds a length measurement of a fish (in millimeters). The value
may be entered from the keyboard or from a properly-configured
digitizer
tablet.