Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
Data Collection and Validation
39
Scrolling Between Detail Records
The scroll bar is located at the bottom of the detail record. If the current detail
record is modified, the scroll bar is disabled until the modification is accepted
or
rejected
.
The scroll bar has these functions, left to right:
Scroll
Function
Description
First Scrolls to first detail record.
Previous Scrolls to the previous detail record.
Record
Number
Displays the ordinal number of the current detail record
within a tag session. Typing any valid record number into
this field and pressing return will automatically scroll to the
corresponding detail record.
If the current detail record is a new record, this field will
display (*New).
Next Scrolls to the next detail record.
Last Scrolls to the very last detail record.
New Scrolls to a new detail record.
Record Count Displays the number of actual detail records in a tag
session. This count only includes saved detail records and
does not include the new detail record, unlike the PITTag2
application.
Note: When a tag session is opened, the detail page is automatically scrolled to a
new detail record to reduce the possibility of overwriting existing data.
Tag Detail Field Reference Guide
This topic provides a reference guide for all detail record fields. Please consult the
current PIT Tag Specification Document
if you have further questions about these
data fields.
Detail Field Content Mandatory/Optional
Tag Code
(HHH.)HHHHHHHHHH Mandatory