Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
P3 Help
30
Template
This command, accessed from the right-click menu only,
allows the user to change the header template
association
for the selected tag session. The user can select a different
header template or set the association to "None".
Tag Session Header
The Tag Session Header contains global information about the tagging project.
Header fields shown in bold are required fields which the user must enter data into
before a tag session is considered valid and complete
. Use the Accept command
located under the Session menu to save any changes made to the tag header.
Navigating and Entering Data into Header Fields
P3 uses a standard tabular data entry mechanism. The ARROW keys move between
header fields. To edit a selected data field, do the following: