Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
P3 Help
28
templates allow the user to customize the header field names or hide fields that are
not required.
Incomplete Tag Sessions
P3 allows users to save tag sessions that are incomplete or invalid. Incomplete tag
sessions can not be exported
or uploaded until all required data have been provided,
and the session contents have been validated. P3 uses the following icons to identify
tag sessions:
Indicates a valid tag session.
Indicates an incomplete or invalid tag session.
Use the validate
command to identify which data fields (if any) in a tag session are
not valid.
Managing Tag Sessions
To create a new tag session, use the New Tag Session command under the File
menu. This will open a new tag session with empty header fields. To create a tag
session from a header template
, click on the arrow to the right of the New Tag
Session command and select a template from the drop down list as shown below.
To open or manage existing tag sessions, use the Open Tag Session command
under the File menu. The tag session manager, shown below, will appear.
Tag Session Manager Commands
Command Description