Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
Configuration
25
Error A general purpose sound event dedicated to runtime or
system generated errors.
Input
Digitizer
Command
Fires whenever a digitizer command
is sent to the
application.
Input Length Fires whenever length input is sent from a digitizer tablet.
Input Tag Fires whenever a tag code input is sent from a reader
device.
Input Weight Fires whenever weight input is sent from a balance device.
Device
Action
Fires whenever a device action event occurs.
Reject
Record
Fires when the current detail record is rejected.
Tag Buffer
Event
Fires when a tag code is placed into the tag code buffer.
Duplicate
Tag Code
Fires when a duplicate tag code is encountered.
Assigning Wave Files to Sound Events
The profile settings enable or disable particular sound events only. Assigning a wave
file to a sound event is performed outside of any profile. Assigning a different
external wave file for a sound event will effect all profiles using that sound event,
and removing an external wave file from a sound event will disable that event in all
profiles.
P3 provides a shortcut to assigning wave files to specific sound events. By double-
clicking a specific sound event inside a profile, P3 will automatically launch the
Window's Sound Applet and position it to the sound event that was clicked.