Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
Configuration
23
Property Effect
Species Run
and Rear
Selects a specific species, run and rearing type code for
this validation constraint. This required field may be
verbose or coded
and defines the restricted domain of
allowable input.
Min Length
(mm)
An optional minimum length constraint. The user will be
alerted if the current detail record matches the specified
species, run and rearing-type setting and the input length
is less than this value.
Max Length
(mm)
An optional maximum length constraint. The user will be
alerted if the current detail record matches the specified
species, run and rearing-type setting and the input length
is greater than this value.
Min Weight
(g)
An optional minimum weight constraint, with precision to
one decimal point. The user will be alerted if the current
detail record matches the specified species, run and
rearing-type setting and the input weight is less than this
value.
Max Weight
(g)
An optional maximum weight constraint, with precision to
one decimal point. The user will be alerted if the current
detail record matches the specified species, run and
rearing-type setting and the input length is greater than
this value.
Audible Alert Sound Events