Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
Overview
5
• Processor Type: Pentium
• Processor Clock Speed: 100 MHz
• Memory: 32 Megabytes RAM
• Hard Disk Space: 30 Megabytes free space
Note: For optimal performance, additional memory (64 Megabytes or greater), disk
space, and greater processor speed (300 MHz or faster) are highly recommended, as
is the use of a mouse or other pointing device.
Optional Requirements
• An Internet connection is required for the following:
• web-deployed installations
• automated data upload
• web import of validation codes
• A sound card and speakers are required for audible alerts
.
Supported Peripheral Devices
This summary is a list of the devices supported by the P3 application for data entry.
This listing may change over time. Please check the P3 Home Page
web site for the
latest information on supported peripheral devices.
Tag Readers
Destron 2001F Portable Transceiver with firmware version 2.0, 2.3 or
version 1.2 with 'Time Tag' firmware setting equal to 'No'.
Destron 2001F Portable Transceiver with firmware version 1.2 and 'Time
Tag' firmware setting equal to 'Yes'.
Destron 400 kHz Benchtop Reader (also supports the 'Proximity GP30
Reader').
Destron Paddle Reader.
Avid PowerTracker II.
DataMars ISO MAX III Fisheries.
AllFlex ISO Compatible RF/ID Portable Reader
Electronic Balances
OHAUS Navigator, Scout and CT600-1200 models with RS-232 kit.