Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
P3 Help
106
Electronic
Balance
CT600/1200,
Navigator
and Scout
series.
tablet
. Uses a proprietary cable to
communicate RS-232 and a NULL
modem adapter.
A&D
FX/FY Model
3000
Balance
www.andweighing.com
Suggested device parameter
settings: C1-1;C2-1; C3-2; C4-4;
C5-1;C6-0.
Sartorius
Combics 1
www.sartorius.com
Default RS-232 settings:
1200 baud
Odd parity
1 stop bit
Handshake: none
The user needs to press Print
button to send current reading to
PC.
Digitizer Tablets
Device
Manufacturer
Website
Notes
Calcomp
Drawing
Boards,
Drawing
Slates and
CadPro.
www.gtcocalcomp.com
Support for standard RS-232,
WINTAB/USB. Should be set to
Calcomp 2000 ASCII format with
a resolution of 254 lpi.
Aiptek
Hyperpen
8000
www.aiptek.com
WINTAB support via USB.
USB/PCMCIA/Serial Converters, Hubs and Controllers.
Device
Manufacturer
Website
Notes
Comtrol
RocketPort
USB Serial
Hub
www.comtrol.com
Doesn't require additional power
adapter.
WhiteHeat www.connecttech.com Doesn't require additional power
adapter. Problems with installation
and caused additional serial ports to
be out of sequence.
Ruggedized
Dual Serial
I/O PC
www.socketcom.com
PC Card adds two high-speed serial
COM ports to a notebook PC.