Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
Tools
95
To perform a simple merge, select a Primary Tag Session to merge into and then
select one or more Secondary Tag Sessions to merge from and press the Merge
button. All of the detail records contained in the Secondary Tag Sessions will be
appended to the Primary Tag Session. Only the primary tag session is affected in
this operation.
Note: Tag Sessions are limited to 9,999 detail records. Merged sessions will
automatically truncate at this limit. Keep this in mind when merging several tag
sessions.
Advanced Merge Settings
Clicking the Advanced button will display advanced property settings describing
what should be done when merging detail records with the same tag code
.
Property Effect
Combine detail
records with
Duplicate Tag Codes
If this setting is checked and a detail
record from a Secondary Tag Session
has the same Tag Code as a detail
record in a Primary Tag Session, the
two detail records will be combined into