Specifications
Table Of Contents
- Overview
- Configuration
- Configuration Profiles
- General Profile Settings
- Configuring Devices
- Activating Tag Actions
- Validation Constraints
- Audible Alert Sound Events
- Data Collection and Validation
- Importing and Exporting
- Tools
- Tag Actions
- Tag Action Manager
- Tag Action Settings and Commands
- Tip: the Replace command will import tag codes much faster than the Import command. Use the Import command only when appending a relatively small number of tag codes (less than 25k) to a tag action.
- Tip: the Delete All and Replace commands will generate a lot of empty space in the P3 database. We recommend running the Compact and Repair utility after running any of these commands to optimize the database.
- Tag Actions and Data Entry
- Digitizer Maps
- Searching Data
- Replacing Data Values
- Merging Tag Sessions
- Dot-Out Wizard
- Remove Dot-Outs
- Duplicate Viewer
- Validation Codes
- Database Maintenance
- Tag Actions
- Appendix
- Frequently Asked Questions
- Hardware Support
- Troubleshooting Common Tag Reader Problems
- Troubleshooting Common Digitizer Tablets Problems
- Digitizer Tablet Doesn't Register Pen Clicks
- WinTab Digitizer Tablet Won't Communicate with a PC
- ASCII Digitizer Tablet Won't Communicate with a PC via Serial Port
- Digitizer Tablet doesn't Communicate with P3
- Digitizer Tablet is Sending the Wrong Commands
- Digitizer Tablet is Sending Wrong Lengths
- Digitizer Tablet Hangs P3 when Connected via Baytech Multiport
- Operating the Destron 400 kHz Benchtop Tag Reader
- Configuring Calcomp Drawing Board III
- Index
Tools
91
Any Any one of the elementary conditions is true.
All All of the elementary conditions must be true.
None None of the elementary conditions are true.
Not All At least one of the elementary conditions is false.
Note: Complex Conditions can be nested (a Complex Condition containing
another Complex Condition as a sub-condition).
Designating which Fields to Display
Clicking on the Fields tab displays a list of data fields that can be returned in the
result set.
A new search will have default fields selected for display in the result set. Checking
the box next to each field will display that field in the result set; if the box is not
checked, the field will not be displayed. Additional fields can be added or deleted
using the
button. Each field can be sorted by selecting a sort function. If multiple
fields are selected for sorting, the multi-column sort will occur in the order the fields
are listed, top to bottom. Each field, depending upon it's type, can have a function
associated with it to display a count, maximum, minimum or an average of that
field's values. The Default command button will reset the field selections to default
fields. The Clear command button will remove all field selections.
Note: The Session_ID and Detail_ID fields contain primary key values from a
relational database. If these fields are selected, by default they will be hidden in the
search results. Select these fields if the search results will be a source for a search
and replace action.
Managing Search Results