Specifications

59
5 Using a personal computer as an external indicator
With the "RsKey" test mode function, a personal computer can be used as an external weight indicator
for the balance. (To do this, set the balance data output mode to stream mode.)
16. Commands
16-1. Command List
Note
A command has a terminator added, that is specified using the "Terminator (Crlf)" parameter
of "Serial interface ( 5if )" in the function table, and is sent to the balance.
Commands To Query Weight Data
C Cancels the S or SIR command.
Q Requests the weight data immediately.
S Requests the weight data when stabilized.
SI Requests the weight data immediately.
SIR Requests the weight data continuously.
E
S
C
P Requests the weight data when stabilized.
Note: The "Q" and "SI" commands, the "S" and "
E
S
C
P" commands behave the same.
Commands To Control The Balance
CAL Same as the CAL key.
EXC
*
Calibration using an external weight
OFF Turns the display off.
ON Turns the display on.
P Same as the ON:OFF key
PRT Same as the PRINT key
R Same as the RE-ZERO key
SMP Same as the SAMPLE key.
T Tare key
Z Same as the RE-ZERO key
E
S
C
T Same as the RE-ZERO key
U Same as the MODE key
?ID Requests the ID number.
?SN Requests the serial number.
?TN Requests the model name.
?PT
Requests the tare weight.
PT: ***.*** ct Changes the tare weight.
The unit added is the current weighing unit in A&D standard format.
Note:
The "R", "Z" and "
E
S
C
T" commands behave the same.
E
S
C
: ASCII code 1Bh
*
: Only for the FZ-CT series