Specifications

45
9-15. Clock And Calendar Function (Only For The FZ-CT Series)
The FZ-CT series balance is equipped with a clock and calendar function. When the "GLP output
(
info)" parameter is set to "1" or "2" and the "Time/Date output (5-td)" parameter is set to "1", "2" or
"
3", the time and date are added to the output data. Set or confirm the time and date as follows:
Operation
1 Press and hold the SAMPLE key until ba5fnc of the function
table is displayed.
2 Press the
SAMPLE key several times to display Cl adj .
3 Press the PRINT key. The balance enters the mode to confirm
or set the time and date.
Confirming the date
4 The current date is displayed with all the digits blinking.
When the date is correct and the operation is to be finished,
press the
CAL key and go to step 8.
When the date is correct and the time is to be confirmed,
press the
SAMPLE key and go to step 6.
When the date is not correct and is to be changed, press
the
RE-ZERO key and go to step 5.
Note
The year is expressed using a two-digit format. For example,
the year 2010 is expressed as "10".
Setting the date (with part of the digits blinking)
5 Set the date using the following keys.
SAMPLE key To select the digits to change the value. The
selected digits blink.
RE-ZERO key To increase the value by one.
MODE key To decrease the value by one.
PRINT key To store the new setting, display end
and go to step 6.
CAL key To cancel the new setting and go to step 6.
Confirming the time
6 The current time is displayed with all the digits blinking.
When the time is correct and the date does not need to be
confirmed, press the
CAL key and go to step 8.
When the time is correct and the date is to be confirmed,
press the
SAMPLE key and go back to step 4.
When the time is not correct and is to be changed, press
the
RE-ZERO key and go to step 7.
To the time
setting mode
Confor
m
To the time
setting mode