Specifications

9-9. Storing Units

The units or modes can be selected and stored in the function table. The sequence of displaying the

units or modes can be arranged in the function table so as to fit the frequency of use.

Select a unit or mode and arrange the sequence of display as follows:

1 Press and hold the

SAMPLE key until ba5fnc of the function

table is displayed.

2 Press the

SAMPLE key several times to display Unit .

3 Press the PRINT key to enter the unit selection mode.

4 Specify a unit or mode in the order to be displayed using the

following keys.

SAMPLE key........To sequentially display the units.

RE-ZERO key.......To specify a unit or mode.

The stabilization indicator appears when the displayed unit or

mode is specified.

5 Press the

PRINT key to store the units or modes. The balance

displays

end and then displays the next menu item of the function table.

6 Press the CAL key to exit the function table. Then the

balance returns to the weighing mode with the unit specified

first in step 4.

Notes

When the power is turned on, the scale displays the unit specified first in step 4.

In the weighing mode, to select a unit or mode for weighing, press the MODE key.

Selec

Specif

Stor

Displays the units

sequentially.