Specifications

24
Class Item and Parameter Description
0 Key mode
Accepts the PRINT key only
when the display is stable.
1
Auto print mode A
(Reference = zero)
2
Auto print mode B
(Reference = last stable value)
Outputs data when the display
is stable and conditions of
ap-p, ap-b and the reference
value are met.
3 Stream mode
Outputs data at the specified display refresh
rate. e.g.: Used when connected to the
AD-8920A remote display.
4
Key mode B
(Immediately)
Accepts the PRINT key regardless of the
display condition.
5
Key mode C
(When stable)
Accepts the PRINT key immediately when
the display is stable, or waits for the display
to be stable when not.
prt
Data output mode
6 Interval output mode Uses interval output mode.
0 Plus only Displayed value>Reference
1 Minus only Displayed value<Reference
ap-p
Auto print polarity
2 Both Regardless of displayed value
0 10 digits
1 100 digits
ap-b
Auto print
difference
2 1000 digits
Difference between reference
value and displayed value
0 Every display refresh
1 2 seconds
2 5 seconds
3 10 seconds
4 30 seconds
5 1 minute
6 2 minute
7 5 minute
int
Interval time
8 10 minute
Interval time for the interval output
mode
(With prt 3)
0 No output
1 Time only
3 Date only
5-td
Time/Date output
4 Time and date
0 No output
5-id
ID number output
1 Output
Selects whether or not the ID
number is output.
0 No pause
pU5e
Data output pause
1 Pause (1.6 seconds)
Selects the data output interval.
0 Not used
at-f
Auto feed
1 Used
Selects whether or not automatic
feed is performed.
0 No output
1 AD-8121 format
info
GLP output
2 General data format
Selects the output format for the
GLP/GMP compliant report.
0 Not used
dout
Data output
ar-d
Zero after output
1 Used
Adjusts zero automatically after
data is output
: Factory setting Digit is a unit of minimum weighing value
*
: Only for the FZ-CT series