Specifications

6. Response Adjustment

This function stabilizes the weight value, reducing the influence on weighing that is caused by drafts

and vibration at the place where the balance is installed.

The function has three stages as follows and can be changed by simple key operation.

Indicator Description

FAST

Fast response, but prone to drafts and vibration.

Good for target weighing.

MID.

SLOW

Slow response, but strong against drafts and vibration

Good for weighing which requires a stable display.

Operation

1 Press and hold the MODE key until RESPONSE is

displayed. And then, release the key.

2 Press the MODE key to select a rate of the response

adjustment. Either FAST, MID. or SLOW can be selected.

3 After a few seconds of inactivity, or when the PRINT key is

pressed, the balance displays eend . Then, it returns to the

weighing mode and displays the updated response indicator.

The response indicator remains displayed for a while.

Note

Setting the response rate automatically changes the

"Condition (Cond)" and "Display refresh rate (5pd)"

parameters of "Environment, Display (ba5fnc)" in the

function table, as shown below:

Indicator Cond (Condition) 5pd (Display refresh rate)

FAST 0 1 (Approx. 10 times/second)

MID. 1 0 (Approx. 5 times/second)

SLOW 2 0 (Approx. 5 times/second)

When the balance is to be used with other setting

combinations, set each parameter in the function table.

Response indicator

Press and hold

Release and

press again

Each pressing the

switches.

or after while