Specifications

11
5. Weighing
The default settings of the unit of weight are the metric carat ( ) and grams ( ).
Pressing the MODE key switches the displayed unit, between and .
To use other units, refer to “9-9. Storing Units” on page 37 to store the units.
5-1. Basic Operation (Gram Mode)
1 Place a container (Carat pan) on the weighing pan, if necessary.
Press the RE-ZERO key to cancel the weight (tare). The balance
displays 0.000 .
2 Place a sample on the pan or in the container.
3 Wait for the stabilization indicator to turn on. Read the value.
While the stabilization indicator is on, pressing the PRINT key
will output the weight value, using the RS-232C serial interface.
4 Remove the sample and container from the pan.
Note
Peripheral equipment, that is sold separately , such as a
printer or a personal computer is required.
When other units of weight are stored as described in
“9-9. Storing Units”, pressing the MODE key switches the
displayed unit.
Press the SAMPLE key to turn on or off the minimum
weighing value.
When the ON:OFF key is pressed with a container placed on
the weighing pan, the balance displays 0.000 and
weighing is started,
Remove the sample
Weighing pa
n
Carat pa
n
Sampl
e
Display off
Weighing pa
n
Containe
r