Specifications

10
4. Display Symbols And Key Operation
Key Operation
Key operation affects how the balance functions. The basic key operations are:
"Press and release the key immediately" or "Press the key" ....................................................
= normal key operation during measurement
"Press and hold the key" .............................................................................................................
Display Symbols
Each key, when pressed or when pressed and held, functions as follows:
Key When pressed When pressed and held
Turns the display on or off. The standby indicator is displayed when the display is turned off.
The weighing mode is enabled when the display is turned on. When the display is turned on,
the password input (
) is displayed if the password function is used. The weighing
mode is enabled if the password function is not used. Refer to "13-3. Inputting Password
When Turning On The Balance".
This key is available anytime. Pressing the key during operation will interrupt the operation and
turn the display off.
In the weighing mode, turns the minimum
weighing value on or off.
In the counting or percent mode, enters the
sample storing mode.
Enters the function table mode.
Refer to "9. Function Table".
Switches the weighing units stored in the function
table. Refer to "9-8. Weighing Units".
Enters the response adjustment mode.
Cancels the operation when performing
settings. With the FZ-CT series, enters the
calibration mode using the internal mass.
(One-touch calibration)
Enters the calibration mode.
Outputs the weight data to a printer or personal
computer using the RS-232C serial interface,
depending on the function table settings.
Confirms the operation when performing
settings.
No function at the factory setting
By changing the function table:
Outputs "Title block" and "End block" for
GLP/GMP compliant report. (Refer to "10-2.
GLP Report".)
Sets the display to zero.
Displays the weight data relative to the weighing capacity, in percentage, in
the weighing mode (Capacity indicator)
Number of statistical data (Statistical calculation mode)
Displays the setting value in the function mode
Response indicator
s
Comparator indicators
Hold mode indicator
Units
Interval output mode
standby indicator
Weight data
Internal output mode
active indicator
Processing indicato
r
Stabilization indicato
r
Standby indicato
r
Processing indicato
r
Blinking