Specifications

5-5 Statistical Calculation Mode (Example of Use)

Here, as an example of use of the statistical calculation mode, mixing of

the multiple formulae such as medicine is described. The mixing

process is recorded using the balance and the printer.

In the example, the FX-3000i WP and the AD-8121B (dump print mode)

are connected using the RS-232C serial interface.

5-5-1 Getting Started

Changing the function table

Changes : To enable the statistical calculation mode

To enable “Zero after output”

Enabling the statistical calculation mode

1 Enter the function table menu.

Press and hold the

SAMPLE key until ba5fnc of the

function table is displayed, then release the key.

2 Select the application function.

Press the

SAMPLE key several times to display ap fnc .

Then, press the PRINT key to display °apf 0 .

3 Change the application function parameter to “2”.

Press the

RE-ZERO key to display apf 2 .

Press the PRINT key to confirm the change.

After end , ba5fnc is displayed.

Enabling “Zero after output”

4 Select “Zero after output”.

Press the

SAMPLE key several times to display dout .

Then, press the PRINT key to display °prt 0 , and press

the SAMPLE key several times to display °ar-d 0 .

5 Enable “Zero after output”.

Press the

RE-ZERO key to display ar-d 1 .

Then, press the PRINT key to confirm the change. After

end , 5if is displayed.

Returning to the weighing mode

6 Press the CAL key to return to the weighing mode.

Return to the weighing mode

Press

several times

Press and hold

Press

several times

Press

several times