Instruction manual

19
5 Confirm that there is nothing on the pan and press
the PRINT key. The balance measures the zero
point. Do not allow vibration or drafts to affect the
balance.
The balance displays the calibration weight value.
6 Place the displayed calibration weight on the pan
and press the PRINT key. The balance measures
the calibration weight. Do not allow vibration or
drafts to affect the balance.
7 The balance displays end . Remove the weight
from the pan.
8 When the GLP output is set, the balance displays
1 glp and outputs “Calibration Report”.
9 The balance will automatically return to the
weighing mode.
10 In the gram mode, place the calibration weight on
the pan and confirm that the value displayed is
within ±2 digits of the specified value. If it is not
within the range, check the ambient conditions such
as drafts and vibration, also check the weighing
pan. Then, repeat steps 1 to 9.