Specifications

LAN-Ethernet Interface (FXi-08) with WinCT-Plus Software
WinCT-Plus software makes it possible for the user to easily set up an IP address, subnet
mask, etc. The user can also send commands for control and acquisition of data from
multiple balances.
Quick USB Interface (FXi-02)
Easy-to-use optional USB interface, with no driver installation necessary, for transfer of
weighing data to a computer (applicable OS – Windows 98 OSR2 or later)
Standard RS-232C Interface
Incorporates bi-directional communication with a PC, printer or other peripheral devices.
Note : Ethernet Hub and cables must
be provided by end-users
WinCT-Plus
Ethernet Hub
Provided by end-user
Multiple Weighing Units
Programmable or standard weighing units of measurement can be
selected; g, pcs, %, oz, lb, L oz, ozt, ct, mom, dwt, GN, tl, tol, mes and MLT
GLP/GMP/GCP/ISO Compliant
In accordance with GLP and LIMS regulations, the balance ID number
and calibration data can be printed out using A&D’s AD-8121B or a PC
Statistical Calculation Function
Can display and/or output statistical calculation data as No.
(number of data), SUM (total), MAX (maximum), MIN (minimum),
R [range (maximum – minimum)], AVE (average), SD (standard
deviation) and CV (coefficient of variation)
Response Indicator Function
Selectable FAST, MID or SLOW response to suit weighing environment
conditions.
ACAI – Automatic Counting Accuracy
Improvement
This counting function recalculates the average unit weight each time a
sample is added to eliminate errors caused by variations in unit weight
Built-in Rechargeable Battery (FXi-09)
An optional Ni-MH rechargeable battery pack can be fitted into the
FZ-i/FX-i Series for use without AC power and for mobile applications
(10 hours charging time for 8 hours operation)
Large Breeze Break (FXi-11)
The small breeze break comes as standard with
all the FZ-i models, FX-120i, FX-200i and FX-300i.